benchmark richmedia

What You Need To Know About Trench Boxes

A variety of engineering and construction sites need trench-digging. They are utilized for the construction of telephone lines, pipes, or any other tubular structure which needs to be placed deep beneath the ground, such as oil rigs, etc. Trenching can sometimes become very difficult work due to the fact that the soil used in these areas has excessive levels of moisture. This creates difficulties when trying not only to eliminate all dirt and debris around objects but also to ensure yourself secure during the procedure since accidentally exposing skin can cause serious injuries.

Trench boxes are crucial to any type of construction or repair to be performed in the ground. Trench boxes can also be utilized to guard against falling due to soil’s condition and thickness. They are constructed from steel/aluminum framing and are employed to temporarily hold it in place while excavations take place within them. Additionally, grout is placed to two layers, if needed, to ensure that there are no cracks on the surface.

Pre Installation

Before digging gets underway It is important to evaluate the potential risks to be taken. This includes knowledge of what equipment is required and how many persons will need access to it, and reflective thought on whether there might be other ways in which the task could be accomplished without risking the life of limb (such low-invasive methods). A full risk assessment must also take place during pre-excavation surveys so that all possible risks can be easily identified prior to the event; this will help minimize the risk of unexpected problems later on.

The trench’s depth is an important factor to consider as well. A 5-foot slab of concrete will support you. If the trench is larger than it, then shoring, or sloping will be required. But, if the deep trench of 20 feet does not have straight sides, any building above ground must account for the increased danger of foundation movement.

A ladder, step or ramp should be used to access the trench. Safe access must always be within 25 feet of workers during an emergency. The trench box can be used to test for low oxygen levels, toxic gasses and other problems. These articulated devices are easy to set up, however you must be cautious not to put them over other.

Care care for the trench

1. In the event of any movement or damage, make sure to check the trench box each day.

2. If working on site everyone should be wearing their protective equipment and have a steel-toed boot as well as high-visibility clothing.

3. Tools and heavy equipment should be kept at least 3 feet away from the edge of any trench.


It’s more difficult to build a trench than to clean it up, since the earth that surrounds it moves. Chain slings can be used to lift soil as well as three different methods for lifting it. The last is using an overhead crane.

1. Straight Pull: This is one of the most basic methods for extracting materials. Simply attach your sling to two points and pull it out, no fussing around with excessive force or inefficient movements.

2. Half Pull: A half pull is used to connect the trench box to one side and lift the box as much as it is possible. This will let you clean up any debris or dirt without causing damage to your garden.

3. Single Pull: You attach one of the chains to your lifting/extraction location. Each panel will be raised by turns. If it’s time to take it down it is best to pull the traditional pull.

For more information, click shoring boxes


Recent Post